Learn about the different types of denture teeth and how they are made – TweezerCo



Learn about the different types of denture teeth and how they are made

Vadim Vinogradov

How Denture Teeth Are Made

There are several types of denture teeth available. Regardless of how they are fabricated, some basic factors must be considered. Here are some of the main materials used for dentures. Learn more about metal plates, acrylic resin, and porcelain. After you've chosen your materials, you'll need to know how they are attached to your mouth. You can also contact a dental specialist to discuss your options. But before you get started, it's best to understand what a denture is and how they are made.

Dental impressions

Taking dental impressions for denture teeth is an important step in getting a new smile. This process is painless and quick, but it can be uncomfortable for some patients. A dentist will place a piece of material called an impression tray on the patient's teeth. This material will create a replica of the patient's teeth. The dentist may need to file the top of the tooth and the sides of the tooth, which will ensure that the crown fits properly. While this may cause some discomfort, it should be a minor inconvenience. The Denturist will make the process as comfortable as possible for you. In some cases, it may be necessary to fill a tooth before the crown is made, which can also cause discomfort. In addition, if the tooth is cracked, this can also make the process uncomfortable.

The dentist will take several impressions. Primary impressions will record the width and depth of the sulcus. A custom tray will be needed if the patient has a large arch. The impression model will be used for diagnosis and treatment planning. In custom trays, final impressions are made using a light-body PVS impression material. During this process, the dentist will record the areas covered by the denture and nearby landmarks.

The process of taking dental impressions can be nerve-wracking. A gag reflex is a common concern for people going for dental procedures, and the foreign material that goes into the mouth can be unpleasant for many people. A few tips can help you to avoid triggering a gag reflex during this appointment. One tip is to stay upright while the impression is taking place. The dentist will also ask you to sit up during the procedure, making the process less uncomfortable.

Acrylic resin

The bond between the denture teeth and acrylic resin is a critical component of the overall quality of a denture. Denture failure may occur if the teeth do not bond properly, causing inconvenience and costly repairs. The ideal acrylic resin denture tooth-to-base material combination and laboratory processing method are not yet established, but extensive research has allowed researchers to make recommendations for best practices. Listed below are some of the benefits of acrylic resin for denture teeth.

The acrylic-resin base attaches to the partial denture framework using a minor connector. A retentive framework attached to the base of the partial denture is necessary to prevent the acrylic-resin base material from weakening. The acrylic-resin base must have a retentive framework placed buccal and lingual to avoid distortion of the base material. The denture base should be at least one millimeter thick for optimal performance, but the thickness should not exceed 1.5mm.

Fortunately, computer-aided design (CAD) and computer-aided manufacturing (CAM) offer several advantages, including reduced porosity and reduced surface roughness. The lower porosity, surface roughness, and reduced surface area will reduce bacterial adhesion. The presence of bacteria on denture bases is associated with halitosis and pneumonia in elderly denture wearers. Therefore, another reason why acrylic resin should be restained is to prevent the development of bacterial colonies.

Previous studies have also evaluated the bond between an acrylic resin and its metal base. Microwave polymerization and autopolymerisation are preferred for denture bases. Despite the advantages of micro and macro-polymerization, micro and nano-sized polymer particles may affect denture durability. Therefore, it is crucial to avoid over-polymerizing acrylic resin and choose a resin that is suitable for your needs.

Metal plates

One common choice for metal denture teeth is a partial metal plate. This type of plate is the smallest and most affordable type of partial plate. These are held with small clips or wires attached to the gums. Partial metal plates are also very stable and retentive. They also tend to have less movement than acrylic plates. The following are the benefits of metal dentures. Let's examine them.

Acrylic dental plates are a relatively inexpensive option. They look natural in the mouth and typically have clasps to adjust the fit. However, acrylic is prone to breakage and may require a more costly replacement. If this is your first denture, you may want to consider an acrylic-based alternative. Acrylic dental plates are not removable and may need to be replaced. In addition, they can also be easily spotted.

Another option for denture teeth is a Maryland bridge. Two metal wings support this type of dental prosthetic on each side. They attach to the inner side of the remaining teeth. The metal wings are sometimes plated with a piece of gold. The base of a Maryland bridge is usually steel or titanium and is plated with other metals such as gold. The metal frameworks are placed in the jawbone and supported by a post. The base material of the posts is biocompatible.

Denture teeth can be made with either metal or acrylic bases. The latter is often more expensive than acrylic ones but can be made thinner and smaller than acrylic ones. They are often referred to as the Rolls-Royce of dentures. They are also stronger than acrylic ones and maybe a bit smaller. However, they are also more expensive and require more quality than acrylic dentures. However, the benefits are worth the price.


The main disadvantage of porcelain denture teeth is that they cause more pressure on the jaw bone and gums. Therefore, you should get an acrylic alternative if you have lost your teeth due to gum disease. Besides, porcelain teeth are difficult to clean and make a clicking noise when you chew. Additionally, they cost more than acrylic ones, which is why most dentists recommend acrylic teeth over porcelain. However, porcelain denture teeth have many benefits, which should be considered when choosing the type of teeth you want.

Porcelain denture teeth are made of biocompatible ceramic material. This material does not wear down like other materials and is safe to replace missing teeth. The porcelain material can last for decades. It also doesn't stain, unlike metal teeth. Compared to metal, porcelain is also biocompatible, which means it can be used to restore teeth. It is also resistant to temperature changes that cause oral sensitivity.

However, the disadvantages of porcelain denture teeth are largely due to their price. Because porcelain is more fragile, it is prone to breakage during cleaning. This is why porcelain denture teeth are recommended for those who don't want to risk their oral health. Besides that, porcelain denture teeth don't stain or get damaged easily. However, price is always a factor when purchasing a denture. If you can't afford porcelain, you can consider a plastic alternative instead.

Another disadvantage of porcelain denture teeth is their hardness. Compared to natural teeth, they are prone to chipping and cracking. Consequently, you should avoid eating crunchy and chewy food while wearing your porcelain dentures. Using a towel or a sink filled with water will help reduce the risk of breaking or chipping your denture teeth. The following are some advantages of porcelain denture teeth:


If you're planning to get a complete set of plastic denture teeth, you should know the differences between these two types. A partial plastic denture is a plate made of false teeth. It may be entirely plastic or a mixture of plastic and metal. The denture will have clips on the edges to help it stay in place, but these clips may show when you open your mouth. While partial plastic dentures cost less than their metal counterparts, they can harm your natural teeth if they're not carefully designed.

Wireless showed good bonding among all denture teeth, but other materials failed to achieve this. Among the plastic denture teeth, the crosslinked ones showed significant differences in the degree of bonding, and the dye penetration was higher with the latter two. A study by the American Academy of Plastic Dentistry, Orthosit, and Livdent showed poor bonding. A t-test was performed to compare the results of these materials.

As porcelain is denser and heavier, it does not transmit biting forces as well as plastic denture teeth do. Consequently, it can accelerate the bone loss process. Plastic false teeth, on the other hand, bond well with the denture base. Because they do not transfer pressure to the gums and bone, they are better for oral health. Plastic is the way to go if you're looking for a solution for missing teeth.

Denture wearers should take out their dentures at night so that they don't fall out during the night. Brush the teeth to remove food debris and leave them in water overnight. Try using an effervescent denture cleaner for stubborn stains, which works great. Make sure to follow the manufacturer's directions. The wear of plastic denture teeth depends on how long you wear them. Your natural bone structure and the shape of your jaw will affect the way you fit.

Older Post Newer Post